Skip to content

USB Peripherals#

Connect your USB peripherals by plugging them into the available USB ports at the rear of the Yaw 2/3 simulator. To access them on your computer, set up the Virtualhere client, which allows you to access connected devices as if they were physically plugged into your PC.

Using a Powered USB Hub#

If you have more than 4 USB devices, consider purchasing a powered USB hub to ensure all devices receive sufficient power. The simulator supports up to 4 directly connected USB devices.

Connecting Devices#

With the simulator powered on, connected USB devices should be recognized by the VirtualHere client on your PC. If they don't appear immediately, try:

  • Unplugging and re-plugging them
  • Restarting the VirtualHere client

Using Peripherals#

Configure peripherals in each game as you would with any peripheral directly connected to your computer.

Troubleshooting USB Device Recognition#

If issues arise, follow these steps:

  1. Update VirtualHere Client: Ensure the VirtualHere client is up-to-date.
  2. Check Driver Updates: Verify that drivers for your USB devices are current.
  3. Test Direct Connection: Connect devices directly to a PC to confirm they function correctly.
  4. Restart Simulator and PC: Restart both devices to resolve any connectivity issues.

By following these guidelines, you should be able to successfully connect and use your USB peripherals with the Yaw 3 simulator.